Header
About this publication
Preface
Introduction
1 Scope and general
1.1 Scope
1.2 Normative references
1.3 Terms and definitions
2 Button/coin batteries
2.1 General
2.2 Battery marking
2.3 Packaging-accessibility
2.3.1 General
2.3.2 Single battery packaging
2.3.3 Multi-battery packaging
2.4 Packaging-marking
2.4.1 Visibility
2.4.2 Content
3 Consumer goods that use button/coin batteries
3.1 General
3.2 Battery securement
3.2.1 General
3.2.2 Testing
3.2.2.1 Test sequence
3.2.2.2 Thermoplastic stress relief test
3.2.2.3 Battery replacement test
3.2.2.4 Drop test
3.2.2.5 Impact test
3.2.2.6 Crush test
3.2.2.7 Conformance
3.3 Battery removal
3.3.1 General
3.3.2 Battery removal dependent on the use of a tool
3.3.2.1 General
3.3.2.2 Battery compartment door/covers secured by screws and similar fasteners
3.3.2.3 Battery compartment door/covers operated by a coin or similar tool
3.3.2.4 Battery compartment door/covers operated by lever action
3.3.3 Battery compartment door/cover removal dependent on complex operations
3.3.4 Battery compartment door/cover removal dependant on force by hand
3.3.5 Battery compartment door/cover removal dependant on other factors
3.4 Safety information
3.4.1 General
3.4.2 Packaging and point of supply
3.4.2.1 General
3.4.2.2 Packaged consumer goods
3.4.2.3 Unpackaged consumer goods
3.4.3 Instructions
3.4.3.1 General
3.4.3.2 Content
Appendix A
A.1 General
A.2 Cell vs battery
A.3 Button vs coin
A.4 Chemistry
A.4.1 General
A.4.2 Lithium (coin)
A.4.3 Alkaline (button)
A.4.4 Silver oxide (button)
A.4.5 Zinc air (button)
Appendix B
B.1 General
B.2 Stress relief test
B.3 Battery replacement test
B.4 Drop test
B.5 Impact test
B.5.1 General
B.5.2 Steel ball test
B.5.3 Vertical impact test
B.6 Crush test
B.7 Finger test
B.8 Fastener retention test
Appendix C
C.1 General
C.2 Bending test
C.3 Torsion test
C.4 Tearing test
C.5 Pushing test
C.6 Test procedure
C.7 Conformance criteria
Appendix D
Bibliography
