Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Materials and finish
1.5.1 Vitreous china
1.5.2 Stainless steel
1.5.3 Plastic and composite
1.5.3.1 Materials
1.5.3.2 Distortion and defects
1.5.3.3 Chemical and stain resistance test
1.5.3.4 Colourfastness test
1.5.3.5 Surface scratching test
1.5.3.6 Impact test
1.5.4 Vitreous enamelled steel
1.6 Instructions
1.7 Marking
2 General requirements
2.1 Design
2.1.1 Traps
2.1.2 Trap risers
2.1.3 Waste outlets
2.1.4 Outlet gratings
2.1.5 Drainage
2.1.6 Flushing water supply
2.2 Design types
2.2.1 Slab and trough urinals
2.2.1.1 General
2.2.1.2 Rigidity
2.2.1.3 Tiling flanges
2.2.1.4 Corner radii
2.2.1.5 Drainage
2.2.1.6 Waste outlet
2.2.1.7 Platform grating
2.2.1.8 Treads
2.2.1.9 Batter
2.2.1.10 Anti-drum
2.2.1.11 Height
2.2.2 Stall urinals
2.2.2.1 General
2.2.2.2 Joining of stainless steel stalls
2.2.3 Wall-hung and pedestal single stall urinals
2.3 Performance
2.3.1 Flushing test for urinals
2.3.2 Load safety test for wall-hung urinals
Appendix A
A.1 Scope
A.2 Relevance
A.3 Terms and definitions
A.4 Testing
A.4.1 Type testing
A.4.2 Batch release testing
A.4.3 Retesting
Appendix B
B.1 Scope
B.2 Principle
B.3 Apparatus
B.3.1 General
B.3.2 Urinals connected to cisterns
B.3.3 Urinals connected to flush valves
B.4 Preparation
B.4.1 Cistern flushed urinals
B.4.2 Urinals connected to flush valves
B.5 Procedure
B.5.1 General
B.5.2 Urinals connected to flushing cisterns
B.5.3 Urinals connected to flushing valves
B.6 Test report
Appendix C
C.1 Scope
C.2 Principle
C.3 Apparatus
C.4 Procedure
C.5 Test report
