Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Design
1.5.1 Drainage
1.5.2 Flashings
1.5.3 Handgrips
1.5.4 Rigidity
1.5.5 Waste outlet
1.5.6 Overflow prevention test
1.6 Installation instructions
1.7 Marking
1.8 Product conformity
2 Cast iron vitreous enamelled baths
2.1 General
2.2 Materials
2.2.1 Cast iron
2.2.2 Thickness
2.2.3 Surface finish
2.3 Surface quality
2.4 Blemishes
3 Pressed steel vitreous enamelled baths
3.1 General
3.2 Materials
3.2.1 Steel
3.2.2 Thickness
3.2.3 Construction
3.2.4 Surface finish
3.3 Surface quality
3.4 Blemishes
4 Ceramic baths
4.1 General
4.2 Materials
4.2.1 Material and surface quality
4.2.2 Surface finish
5 Stainless steel baths
5.1 General
5.2 Materials
5.2.1 Stainless steel
5.2.2 Thickness
5.2.3 Construction
6 Plastic and composite materials baths
6.1 General
6.2 Materials
6.3 Properties of finished baths
6.3.1 General
6.3.2 Surface quality
6.3.3 Chemical and stain resistance
6.3.4 Colour fastness
6.3.5 Surface scratching
6.3.6 Impact
6.3.7 Thermal shock test
Appendix A
A.1 Scope
A.2 Relevance
A.3 Terms and definitions
A.4 Testing
A.4.1 Type testing
A.4.2 Batch release testing
A.4.3 Retesting
Appendix B
B.1 Scope
B.2 Principle
B.3 Application
B.4 Apparatus
B.5 Preparation
B.6 Rigidity — Test 1
B.6.1 Procedure
B.6.2 Report
B.7 Rigidity — Test 2
B.7.1 Procedure
B.7.2 Report
B.8 Rigidity — Test 3
B.8.1 Procedure
B.8.2 Report
B.9 Rigidity — Test 4
B.9.1 Procedure
B.9.2 Report
B.10 Rigidity — Test 5
B.10.1 Procedure
B.10.2 Report
B.11 Rigidity — Test 6 (for handgrips)
B.11.1 Application
B.11.2 Procedure
B.11.3 Report
B.12 Strength — Test 7 (for handgrips)
B.12.1 Application
B.12.2 Procedure
B.12.3 Report
Appendix C
C.1 Scope
C.2 Principle
C.3 Apparatus
C.4 Procedure
C.5 Test report
