Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Normative references
1.3 Definitions
1.4 Demonstration of conformity to this Standard
2 Design
2.1 Water seal
2.2 Fixing and support
2.2.1 Pedestal pan
2.2.2 Wall-hung pan
2.2.3 Outlet connection ends
3 Performance requirements
3.1 Full flush—Paper discharge test
3.2 Reduced flush—Paper discharge test
3.3 Solids discharge test
3.4 Leakage and capacity test
3.5 Splash test
3.6 Wetting test
3.6.1 Pan with a rim
3.6.2 For pan without a rim
3.7 Load safety test
3.8 Reduced-flush liquid contaminant test
4 Marking, labelling and installation instructions
4.1 Marking
4.2 Labelling
4.3 Installation instructions
5 Materials
5.1 Vitreous china
5.1.1 General
5.1.2 Glazed surfaces
5.2 Stainless steel
5.2.1 General
5.2.2 Thickness
5.2.3 Surface finish (internal and external)
5.2.4 Construction
5.3 Other materials
Appendix A
A1 Scope
A2 Principle
A3 Apparatus
A4 Procedure
A5 Test report
Appendix B
B1 Scope
B2 Principle
B3 Apparatus
B4 Procedure
B5 Test report
Appendix C
C1 Scope
C2 Principle
C3 Apparatus
C4 Test pieces
C5 Procedure
C6 Test report
Appendix D
D1 Scope
D2 Principle
D3 Apparatus
D4 Procedure
D5 Test report
Appendix E
E1 Scope
E2 Principle
E3 Apparatus
E4 Procedure
E5 Test report
Appendix F
F1 Scope
F2 Principle
F3 Apparatus
F4 Procedure
F5 Test report
Appendix G
G1 Scope
G2 Principle
G3 Apparatus
G4 Procedure
G4.1 Pedestal pan
G4.2 Wall-hung pan
G5 Test report
Appendix H
H1 Scope
H2 Principle
H3 Apparatus
H4 Procedure
H5 Test report
Appendix I
I1 Scope
I2 Relevance
I3 Definitions
I4 Testing
I4.1 Type testing
I4.2 Retesting
I4.3 Batch release testing
Amendment control sheet
AS 1172.1:2014
Amendment No. 1 (2018)
Revised text
Bibliography
